Tuesday, May 1, 2001

Review: Dritz My Double Deluxe Dressform



Price: ~US$100.00-$150.00

Many (all?) of the other reviews for these types of dressforms (My Double, Twin Fit, etc.) complain that no amount of turning the dials makes the dressform match the reviewers' measurements. After reading other reviews for My Double (not Deluxe) dressforms, I feel the need to address those complaints.

Dressforms are like patterns. They are standardized to some mysterious "ideal" figure. How many of us have that ideal figure and can fit a pattern right out of the envelope with NO adjustments? The same is true for dressforms. Unless you've had a dressform cast from your own body, you *will* need to make some adjustments. And by adjustments, I mean more than turning the dials.

This link will take you to the photo narrative of how I padded out my dressform. The whole process took a few hours. Not too long, and not at all difficult. The time invested was well worth it as I now have a form very much like me and one which is a tremendous help when adjusting patterns and previewing garments. If you buy this type of form, spend the time to pad it and you'll be much happier.

This thread on the PR message board is extremely helpful and covers many dressforms and the reasons why or why not they were purchased. It also covers the processes and materials some of us have used to pad our dressforms to be just like ourselves.

Also, Kathryn's tip, here, here, is a must-read in how to make your standardized dressform conform to your own shape.

All right, on to the review ...

Features:

• 10 Auto-set dials - Press & turn for easy adjustments

• Adjustments can be made in 1/2" increments

• Foam-backed nylon cover for easy pinning and marking

• Adjustable neck with pin cushion & Adjustable Height

• Hem Leveler

Observations:

I purchased the My Double Deluxe form (MDD) in late-January 2006 from Joann's online. They were on sale for half price (which I think they always are online) and at the time, there was a free shipping offer. I paid approximately $163 with tax. Joann's charges sales tax for internet purchases. The MDD arrived in approximately 2 weeks.

I ordered a Medium because this size could be made significantly *smaller* than my measurements. Since I knew I would be padding it, I knew I needed to start with something smaller than me. I recommend you do the same for any non-customized dressform. It's a lot easier to make a small form bigger than it is to make a big form smaller.

The quality of the form itself is what I expected. It's not the best but it's far from the worst. It's lightweight plastic (shell) and aluminum (stand). Now that I've had it for a while, I can see that it's not really as low-quality as I first thought. It's very lightweight, which is nice because I tend to move her around in my sewing area a lot.

When it arrived, it came in a thin corrugated cardboard box with no interior padding. (The plastic must be sturdy to have survived the UPS ride from J's warehouse to being dropped -- and I do mean dropped -- at my home!) There is some assembly required. Specifically, you must insert the feet of the tripod into the stand and then you must attach the stand pole into the torso pole. It's not hard, requires no tools, and because the form is lightweight, it doesn't require any strength. You just need an area large enough to lay the stand down on the floor or a table.

The dials are fiddly and a bit awkward to adjust. Put on a pair of rubber dishwashing type gloves before you start so you don't scrape up your fingers and then you'll be fine. I didn't do this but in retrospect, I probably should have. I never could quite figure out how to adjust the dials so that the numbers on the metal strips actually meant something. But that didn't matter to me too much because I just used my tape measure and adjusted until it reached the measurement I wanted. There were very generic "instructions" included but they covered more than this specific dressform and were overly simplistic. They were adequate but with much room for immprovement.

Some of the adjustments require that you reach up inside the form. You might want to make your adjustments before you put it on the pole as it's probably easier to wrestle with it standing and laying on a table than on the form. But that's a personal preference thing. I made all the adjustments with it on the stand and just knelt on the floor and reached up.

I chose this form after seeing a Medium MDD on display in a brick and mortar Joann's. It looked more like a "middle-aged" (ugh!) figure than the perkier Twin Fit or Simplicity forms. The bust is a B cup but the bust points sit a bit lower than those perkier forms and the waist curve is more gradual, thus matching me better before I ever started padding it out.

The most noticeable difference between the MDD and the My Double (not Deluxe) and other "cheapie" forms is that the MDD has a lower section with thighs for fitting pants. Before purchasing the MDD, I thought this would be a great feature. It probably is, but I haven't used it yet, mostly because you have to completely separate the center pole from the torso in order to slide a pair of pants on or off. I can just see me wrestling on the floor and it's not a pretty picture! I do think that if you've padded the lower body to match yours and you use it to fit *before* you sew the last sideseam, that pants fitting can be accomplished without taking apart the form. But once both sideseams are sewn, there's no other way to slide the pants on without a wrestling match (or without rigging up some way to hang the dressform so it doesn't need the pole for support).

Likes:

1. The overall quality. It may be mostly plastic, but it seems like it will hold up for as long as I need it. (Four years going strong so far.)

2. Price. I wasn't sure if I would actually use a dressform so I didn't want to break the bank to find out, especially if it turned out I didn't like it. $150 is still significant money, but it's a LOT cheaper than many other dressforms available so I felt I got a good deal. (Turns out I use it a lot!)

3. Now having a dressform that matches me!

Dislikes:

1. The tripod stand. It works fine, but I would prefer a dressform on wheels. But since it is lightweight, it's not a burden at all to move it. Just that my personal preference would be wheels.

2. The difficulty in getting pants on/off as mentioned above.

3. The fiddly dials. They work, but they definitely feel/act cheap. There is a reason this is NOT a $600 dressform. Don't expect it to be gold plated and you won't be disappointed. :)

8 comments:

  1. I really appreciated your review of the MDD dress form. I have always wanted a dress form but couldn't quite spend the money but have definitely decided to get this one. Your comments have helped me make this decision.

    ReplyDelete
  2. I really appreciated your comments on the MDD dress form. I have always wanted one but was hesitant to spend the money. I have definitely decided to buy the MDD after reading your review.

    ReplyDelete
  3. I love knowing that you can pad it to be accurately shaped like you. The tip about buying a smaller size is priceless! I would never have thought of that, other than the consideration of when I lose weight "someday."

    ReplyDelete
  4. Is the Deluxe really 10 dials? I read somewhere that it had 12 dials, adjustable in increments of 1/16". I am researching what to buy and this would really effect my decision.

    ReplyDelete
  5. I bought one, finding it had the right ranges to meet my figure, but found that the waist-height is not adjustable as advertized. The form can extend, but they have cut the internal post too short to get the extension by simply lowering the bottom of the form to the bottom of the pole. They are assuming women's torso range is close to that for men - they are quite mistaken. I had to add a narrow piece of PVC into the neck and use the screw holding the neck to the center pole to adjust the PVC instead. This gave me the missing 2-1/2" of center post so I could use the overlap of the check and hip pieces to get the adjustment range they quoted. It takes an unexpected amount of effort to pull the chest piece from the waste piece and the bottom adjustment shown does not separate them.

    ReplyDelete
  6. The torso height adjustment does not work as indicated. The adjustment to lengthen it by lowering the bottom is inadequate to slide the chest pieces relative to the hip and the center pole has been made too short to get the full torso height the overlap would allow. I had to add a thin piece of PVC pipe under the neck cap, using the hold-down screw for the neck to instead hold/adjust the piece of PVC. It gave me the additional 2-1/2" I needed and that the vinyl sections were designed to allow. The core length on this is set for men, not women.

    ReplyDelete
  7. Um, I have a 14.5" back-waist length and I am a woman. So no, this is not "set for men".

    ReplyDelete
  8. I was also wondering if someone could confirm the neck measurement on the smallest setting? Thanks.

    ReplyDelete

Thank you for each and every comment. I appreciate them all, but I have to be honest and let you know that I'm usually bad about answering questions. I hope you understand that there just isn't enough time in the day to do everything I want to do.

To help keep spam comments under control, any comments to blog posts that are more than 30 days old are moderated and will not show up immediately.